In Wind Energy, Anchor Points and Lifelines are a common way to work at height - and a common source of falls when they are misused. This guide explains how Wind Energy teams in Ireland use Anchor Points and Lifelines safely, and why a Working at Heights Course ties it all together.
Anchor Points and Lifelines in Wind Energy: where the risk lies
A turbine technician climbing a tower in a midlands or coastal wind farm, where any rescue must be planned before the climb begins. Anchor Points and Lifelines are suited to providing a secure attachment for restraint or arrest systems on roofs, structures and access routes, but in a Wind Energy setting the margin for error is small.
Pre-use checks for Anchor Points and Lifelines
Before any Wind Energy worker uses Anchor Points and Lifelines, confirm that:
- Fixings and structure are sound
- The system is in date for inspection
- The connector is compatible and locked
- Fall-clearance below the anchor is sufficient
The relevant standard here is EN 795 (anchor devices), installed and certified by a competent person and inspected regularly.
Common Anchor Points and Lifelines faults to never ignore
- Incompatible connectors
- No inspection record
- Using unrated structure as an anchor
- Insufficient fall clearance
Wind work is among the most demanding height work in Ireland, requiring specialist training, GWO-style standards and robust rescue plans.
The Working at Heights Course makes compliance simple
The practical fix is straightforward. Our Working at Heights Course is delivered fully online, takes about 45 minutes, and issues a downloadable certificate the same day. It is CPD certified, RoSPA approved and QQI aligned, and it is written specifically for Wind Energy teams using Anchor Points and Lifelines.
The Working at Heights Training covers the avoid-prevent-minimise hierarchy, ladder and stepladder safety, MEWPs and scaffolds, harnesses and anchor points, and how to carry out a proper risk assessment. Every learner finishes with a recognised Working at Heights Certificate that stands up to HSA inspection and supports your insurance position.
Training that goes beyond the tick-box
The rescue plan is the part most teams forget. If a worker doing Anchor Points and Lifelines in Wind Energy falls and is left hanging in a harness, suspension trauma can become life-threatening within minutes. Calling the emergency services is not a rescue plan; having the equipment, the trained people and the method to recover them quickly is. Our Working at Heights Training makes that planning routine.
Supervision is the quiet control that holds everything together. Even a perfectly trained worker drifts under time pressure, so someone on site needs the knowledge and the authority to stop unsafe work involving Anchor Points and Lifelines in Wind Energy before it becomes an incident. That only happens when supervisors are trained too.
Frequently asked questions
Do Wind Energy workers need training to use Anchor Points and Lifelines?
Yes. Safe use of Anchor Points and Lifelines is part of working at height. A Working at Heights Course covers selection, inspection and safe use for Wind Energy tasks.
How often should Anchor Points and Lifelines be inspected?
Before every use by the operator, plus formal recorded inspections to the relevant standard. Keep the logs for HSA inspection.
Is online training enough for Wind Energy height work?
Our online Working at Heights Training covers the legal and safe-system knowledge; equipment-specific practical tickets (such as IPAF or PASMA) are added where the task requires them.
Get certified today
Do not wait for an HSA inspection or a near miss to act. Wind Energy teams can complete the Working at Heights Course online in 45 minutes and download a certificate the same day. For 10 or more learners, see our team training rates, or contact our team for a tailored quote.
Start the online Working at Heights Training now and put a recognised certificate in every worker's file before the next job at height begins.
