For Construction employers and workers, this guide explains what Working at Heights training actually costs and how to certify a team affordably, and how a Working at Heights Course ties it to your day-to-day Construction work.
Cost and Pricing in Construction
A two-storey block where roofers, blocklayers and a MEWP operator all work above ground on the same day, each needing their own safe system of work. When it comes to what Working at Heights training actually costs and how to certify a team affordably, Construction teams have to control hazards such as collapsing or poorly tied scaffolds, falling materials striking workers below and overturning MEWPs on soft or sloping ground. Construction sites also fall under the Safety, Health and Welfare at Work (Construction) Regulations 2013, with the PSCS coordinating work-at-height between contractors. Safe Pass covers site access but is not a Working at Heights ticket.
The Construction action list
- Record a risk assessment for each Construction task at height
- Choose collective protection before personal protection
- Certify the team with a Working at Heights Course
- Inspect equipment and keep the logs
- Plan rescue before work begins
The Working at Heights Course makes compliance simple
Certifying your people is quicker than most employers expect. Our Working at Heights Course is delivered fully online, takes about 45 minutes, and issues a downloadable certificate the same day. It is CPD certified, RoSPA approved and QQI aligned, and it is written specifically for Construction teams across Ireland.
The Working at Heights Training covers the avoid-prevent-minimise hierarchy, ladder and stepladder safety, MEWPs and scaffolds, harnesses and anchor points, and how to carry out a proper risk assessment. Every learner finishes with a recognised Working at Heights Certificate that stands up to HSA inspection and supports your insurance position.
Training that goes beyond the tick-box
Weather turns a routine job into a dangerous one faster than anything else in Ireland. Wind, rain, frost and poor light all raise the risk of Cost and Pricing in Construction, and the right call is often to stop and reassess rather than push on. Knowing where that line sits is part of being properly trained.
The rescue plan is the part most teams forget. If a worker doing Cost and Pricing in Construction falls and is left hanging in a harness, suspension trauma can become life-threatening within minutes. Calling the emergency services is not a rescue plan; having the equipment, the trained people and the method to recover them quickly is. Our Working at Heights Training makes that planning routine.
Frequently asked questions
How much does a Working at Heights Course cost in Ireland?
Online certification starts around EUR 35 per learner, with bulk pricing for teams, far less than a single HSA improvement notice or insurance claim.
How does this affect Construction specifically?
In Construction, the same rules apply with sector-specific hazards. Our Working at Heights Training covers both.
Is online training enough for Construction?
Yes for the core legal and safe-system knowledge; add equipment-specific tickets where the Construction task requires them.
More on staying safe at height
Young and new workers are over-represented in fall statistics, and construction work at height is no exception. Setting good habits from the very first day - never climbing on furniture, never overreaching, always inspecting equipment - is far easier than unlearning bad ones later. Early certification with a Working at Heights Course pays back for an entire career.
Get certified today
Do not wait for an HSA inspection or a near miss to act. Construction employers and workers can complete the Working at Heights Course online in 45 minutes and download a certificate the same day. For 10 or more learners, see our team training rates, or contact our team for a tailored quote.
Start the online Working at Heights Training now and put a recognised certificate in every worker's file before the next job at height begins.
