Using Harnesses and Fall-Arrest Systems for work at height in Wexford? The same Irish rules apply here as everywhere else: the equipment must be suitable, inspected and used by someone with a Working at Heights Course behind them.
Harnesses and Fall-Arrest Systems safety for Wexford worksites
Harnesses and Fall-Arrest Systems suit fall arrest or restraint only where collective protection (guardrails, platforms) is not reasonably practicable. In and around Wexford, that covers a wide range of maintenance, construction and access tasks. The governing standard is EN 361 (harness), EN 355 (energy-absorbing lanyard), EN 360 (retractable), inspected before use and thoroughly examined at least every 12 months.
Pre-use checks before you use Harnesses and Fall-Arrest Systems in Wexford
- The anchor point is rated and suitable
- Webbing is free of cuts, fraying, chemical or heat damage
- Stitching is intact
- Buckles and D-rings work and are undamaged
The Working at Heights Course makes compliance simple
Certifying your people is quicker than most employers expect. Our Working at Heights Course is delivered fully online, takes about 45 minutes, and issues a downloadable certificate the same day. It is CPD certified, RoSPA approved and QQI aligned, and it is written specifically for Harnesses and Fall-Arrest Systems users in Wexford and the wider county.
The Working at Heights Training covers the avoid-prevent-minimise hierarchy, ladder and stepladder safety, MEWPs and scaffolds, harnesses and anchor points, and how to carry out a proper risk assessment. Every learner finishes with a recognised Working at Heights Certificate that stands up to HSA inspection and supports your insurance position.
Training that goes beyond the tick-box
Supervision is the quiet control that holds everything together. Even a perfectly trained worker drifts under time pressure, so someone on site needs the knowledge and the authority to stop unsafe work involving Harnesses and Fall-Arrest Systems use in Wexford before it becomes an incident. That only happens when supervisors are trained too.
Insurers now ask directly whether your team holds current Working at Heights certification before they price a policy or settle a claim involving Harnesses and Fall-Arrest Systems use in Wexford. A worker hurt at height with no Working at Heights Certificate turns a defensible incident into an indefensible one, and that follows your premium for years.
Frequently asked questions
Do Wexford workers need training for Harnesses and Fall-Arrest Systems?
Yes. Anyone in Wexford using Harnesses and Fall-Arrest Systems at height needs a Working at Heights Certificate to prove competence.
Can I train online in Wexford?
Yes. Our online Working at Heights Training is taken from anywhere in Wexford or Wexford, with a same-day certificate.
More on staying safe at height
Weather turns a routine job into a dangerous one faster than anything else in Ireland. Wind, rain, frost and poor light all raise the risk of harnesses and fall-arrest systems use in Wexford, and the right call is often to stop and reassess rather than push on. Knowing where that line sits is part of being properly trained.
The cheapest control is always to avoid the work at height in the first place. For harnesses and fall-arrest systems use in Wexford, that can mean long-handled tools, lowering the task to ground level, or designing the job so no one needs to climb. Where that is impossible, collective protection such as guardrails and platforms beats personal protection every time.
Get certified today
Do not wait for an HSA inspection or a near miss to act. Harnesses and Fall-Arrest Systems users in Wexford can complete the Working at Heights Course online in 45 minutes and download a certificate the same day. For 10 or more learners, see our team training rates, or contact our team for a tailored quote.
Start the online Working at Heights Training now and put a recognised certificate in every worker's file before the next job at height begins.
