In Construction, Ladders are a common way to work at height - and a common source of falls when they are misused. This guide explains how Construction teams in Ireland use Ladders safely, and why a Working at Heights Course ties it all together.
Ladders in Construction: where the risk lies
A two-storey block where roofers, blocklayers and a MEWP operator all work above ground on the same day, each needing their own safe system of work. Ladders are suited to short-duration, light work where three points of contact can be kept and a better platform is not justified, but in a Construction setting the margin for error is small.
Pre-use checks for Ladders
Before any Construction worker uses Ladders, confirm that:
- Rungs are secure, clean and not worn
- Stiles are straight and undamaged
- Locking mechanisms and stays work fully
- No makeshift repairs, paint hiding cracks, or missing parts
The relevant standard here is EN 131 (the current European standard for portable ladders; older Class 1 / EN 131 markings indicate industrial duty).
Common Ladders faults to never ignore
- Mud or grease on rungs reducing grip
- Loose or damaged rungs
- Bent or split stiles
- Worn or missing feet
Construction sites also fall under the Safety, Health and Welfare at Work (Construction) Regulations 2013, with the PSCS coordinating work-at-height between contractors. Safe Pass covers site access but is not a Working at Heights ticket.
The Working at Heights Course makes compliance simple
The practical fix is straightforward. Our Working at Heights Course is delivered fully online, takes about 45 minutes, and issues a downloadable certificate the same day. It is CPD certified, RoSPA approved and QQI aligned, and it is written specifically for Construction teams using Ladders.
The Working at Heights Training covers the avoid-prevent-minimise hierarchy, ladder and stepladder safety, MEWPs and scaffolds, harnesses and anchor points, and how to carry out a proper risk assessment. Every learner finishes with a recognised Working at Heights Certificate that stands up to HSA inspection and supports your insurance position.
Training that goes beyond the tick-box
The rescue plan is the part most teams forget. If a worker doing Ladders in Construction falls and is left hanging in a harness, suspension trauma can become life-threatening within minutes. Calling the emergency services is not a rescue plan; having the equipment, the trained people and the method to recover them quickly is. Our Working at Heights Training makes that planning routine.
Falls from height remain one of the leading causes of serious and fatal workplace injury in Ireland, year after year. The pattern is depressingly consistent for Ladders in Construction: a short task, a familiar setting, a ladder or platform that seemed fine, and a single moment of overreach. Proper training breaks that pattern by making the safe choice the automatic one.
Frequently asked questions
Do Construction workers need training to use Ladders?
Yes. Safe use of Ladders is part of working at height. A Working at Heights Course covers selection, inspection and safe use for Construction tasks.
How often should Ladders be inspected?
Before every use by the operator, plus formal recorded inspections to the relevant standard. Keep the logs for HSA inspection.
Is online training enough for Construction height work?
Our online Working at Heights Training covers the legal and safe-system knowledge; equipment-specific practical tickets (such as IPAF or PASMA) are added where the task requires them.
Get certified today
Do not wait for an HSA inspection or a near miss to act. Construction teams can complete the Working at Heights Course online in 45 minutes and download a certificate the same day. For 10 or more learners, see our team training rates, or contact our team for a tailored quote.
Start the online Working at Heights Training now and put a recognised certificate in every worker's file before the next job at height begins.
