In Education and Schools, Ladders are a common way to work at height - and a common source of falls when they are misused. This guide explains how Education and Schools teams in Ireland use Ladders safely, and why a Working at Heights Course ties it all together.
Ladders in Education and Schools: where the risk lies
A school caretaker clearing blocked gutters before winter, where the right ladder set-up and a colleague footing it prevent a serious fall. Ladders are suited to short-duration, light work where three points of contact can be kept and a better platform is not justified, but in a Education and Schools setting the margin for error is small.
Pre-use checks for Ladders
Before any Education and Schools worker uses Ladders, confirm that:
- Stiles are straight and undamaged
- No makeshift repairs, paint hiding cracks, or missing parts
- Feet are present, intact and grip the surface
- Rungs are secure, clean and not worn
The relevant standard here is EN 131 (the current European standard for portable ladders; older Class 1 / EN 131 markings indicate industrial duty).
Common Ladders faults to never ignore
- Loose or damaged rungs
- Seized locking bars
- Bent or split stiles
- Mud or grease on rungs reducing grip
Schools combine height work with child-safety duties, so timing and exclusion zones are essential.
The Working at Heights Course makes compliance simple
Certifying your people is quicker than most employers expect. Our Working at Heights Course is delivered fully online, takes about 45 minutes, and issues a downloadable certificate the same day. It is CPD certified, RoSPA approved and QQI aligned, and it is written specifically for Education and Schools teams using Ladders.
The Working at Heights Training covers the avoid-prevent-minimise hierarchy, ladder and stepladder safety, MEWPs and scaffolds, harnesses and anchor points, and how to carry out a proper risk assessment. Every learner finishes with a recognised Working at Heights Certificate that stands up to HSA inspection and supports your insurance position.
Training that goes beyond the tick-box
Falls from height remain one of the leading causes of serious and fatal workplace injury in Ireland, year after year. The pattern is depressingly consistent for Ladders in Education and Schools: a short task, a familiar setting, a ladder or platform that seemed fine, and a single moment of overreach. Proper training breaks that pattern by making the safe choice the automatic one.
Young and new workers are over-represented in fall statistics, and Ladders in Education and Schools is no exception. Setting good habits from the very first day - never climbing on furniture, never overreaching, always inspecting equipment - is far easier than unlearning bad ones later. Early certification with a Working at Heights Course pays back for an entire career.
Frequently asked questions
Do Education and Schools workers need training to use Ladders?
Yes. Safe use of Ladders is part of working at height. A Working at Heights Course covers selection, inspection and safe use for Education and Schools tasks.
How often should Ladders be inspected?
Before every use by the operator, plus formal recorded inspections to the relevant standard. Keep the logs for HSA inspection.
Is online training enough for Education and Schools height work?
Our online Working at Heights Training covers the legal and safe-system knowledge; equipment-specific practical tickets (such as IPAF or PASMA) are added where the task requires them.
Get certified today
Do not wait for an HSA inspection or a near miss to act. Education and Schools teams can complete the Working at Heights Course online in 45 minutes and download a certificate the same day. For 10 or more learners, see our team training rates, or contact our team for a tailored quote.
Start the online Working at Heights Training now and put a recognised certificate in every worker's file before the next job at height begins.
