In Construction, Mobile Tower Scaffolds are a common way to work at height - and a common source of falls when they are misused. This guide explains how Construction teams in Ireland use Mobile Tower Scaffolds safely, and why a Working at Heights Course ties it all together.
Mobile Tower Scaffolds in Construction: where the risk lies
A two-storey block where roofers, blocklayers and a MEWP operator all work above ground on the same day, each needing their own safe system of work. Mobile Tower Scaffolds are suited to medium-duration work at height where a stable, guarded platform is needed and ground conditions allow, but in a Construction setting the margin for error is small.
Pre-use checks for Mobile Tower Scaffolds
Before any Construction worker uses Mobile Tower Scaffolds, confirm that:
- Castors are locked and the ground is firm and level
- Guardrails and toe boards are in place
- Stabilisers and outriggers are fitted as specified
- Platform boards and trapdoors are complete and secure
The relevant standard here is EN 1004 (mobile access towers), built and inspected by a PASMA-trained competent person.
Common Mobile Tower Scaffolds faults to never ignore
- Overloaded platforms
- Missing braces or stabilisers
- Climbing the outside instead of the internal ladder
- Unlocked castors
Construction sites also fall under the Safety, Health and Welfare at Work (Construction) Regulations 2013, with the PSCS coordinating work-at-height between contractors. Safe Pass covers site access but is not a Working at Heights ticket.
The Working at Heights Course makes compliance simple
Here is the good news: getting compliant is fast and inexpensive. Our Working at Heights Course is delivered fully online, takes about 45 minutes, and issues a downloadable certificate the same day. It is CPD certified, RoSPA approved and QQI aligned, and it is written specifically for Construction teams using Mobile Tower Scaffolds.
The Working at Heights Training covers the avoid-prevent-minimise hierarchy, ladder and stepladder safety, MEWPs and scaffolds, harnesses and anchor points, and how to carry out a proper risk assessment. Every learner finishes with a recognised Working at Heights Certificate that stands up to HSA inspection and supports your insurance position.
Training that goes beyond the tick-box
Insurers now ask directly whether your team holds current Working at Heights certification before they price a policy or settle a claim involving Mobile Tower Scaffolds in Construction. A worker hurt at height with no Working at Heights Certificate turns a defensible incident into an indefensible one, and that follows your premium for years.
Young and new workers are over-represented in fall statistics, and Mobile Tower Scaffolds in Construction is no exception. Setting good habits from the very first day - never climbing on furniture, never overreaching, always inspecting equipment - is far easier than unlearning bad ones later. Early certification with a Working at Heights Course pays back for an entire career.
Frequently asked questions
Do Construction workers need training to use Mobile Tower Scaffolds?
Yes. Safe use of Mobile Tower Scaffolds is part of working at height. A Working at Heights Course covers selection, inspection and safe use for Construction tasks.
How often should Mobile Tower Scaffolds be inspected?
Before every use by the operator, plus formal recorded inspections to the relevant standard. Keep the logs for HSA inspection.
Is online training enough for Construction height work?
Our online Working at Heights Training covers the legal and safe-system knowledge; equipment-specific practical tickets (such as IPAF or PASMA) are added where the task requires them.
Get certified today
Do not wait for an HSA inspection or a near miss to act. Construction teams can complete the Working at Heights Course online in 45 minutes and download a certificate the same day. For 10 or more learners, see our team training rates, or contact our team for a tailored quote.
Start the online Working at Heights Training now and put a recognised certificate in every worker's file before the next job at height begins.
