In Roofing, Roof Ladders and Crawl Boards are a common way to work at height - and a common source of falls when they are misused. This guide explains how Roofing teams in Ireland use Roof Ladders and Crawl Boards safely, and why a Working at Heights Course ties it all together.
Roof Ladders and Crawl Boards in Roofing: where the risk lies
A re-slating job on a pitched domestic roof in winter, where one slip on a frosted slate can be fatal without edge protection and a rescue plan. Roof Ladders and Crawl Boards are suited to spreading load and providing footing on pitched or fragile roofs where access cannot be avoided, but in a Roofing setting the margin for error is small.
Pre-use checks for Roof Ladders and Crawl Boards
Before any Roofing worker uses Roof Ladders and Crawl Boards, confirm that:
- Boards are undamaged and rated
- Edge protection is in place
- The ridge hook is sound and properly engaged
- Access to the roof is safe and secured
The relevant standard here is used with edge protection and a rescue plan; selected for the roof pitch and fragility.
Common Roof Ladders and Crawl Boards faults to never ignore
- No edge protection
- Unsecured ridge hook
- Use in wet or windy conditions
- No rescue plan
Fragile-roof work is one of the HSA's top fatal-fall causes. Crawl boards, perimeter protection and a documented rescue plan are expected before anyone steps onto the roof.
The Working at Heights Course makes compliance simple
The practical fix is straightforward. Our Working at Heights Course is delivered fully online, takes about 45 minutes, and issues a downloadable certificate the same day. It is CPD certified, RoSPA approved and QQI aligned, and it is written specifically for Roofing teams using Roof Ladders and Crawl Boards.
The Working at Heights Training covers the avoid-prevent-minimise hierarchy, ladder and stepladder safety, MEWPs and scaffolds, harnesses and anchor points, and how to carry out a proper risk assessment. Every learner finishes with a recognised Working at Heights Certificate that stands up to HSA inspection and supports your insurance position.
Training that goes beyond the tick-box
Competence is not the same as experience. A worker who has used ladders for twenty years can still carry twenty years of bad habits. Refresher training matters for Roof Ladders and Crawl Boards in Roofing precisely because confidence drifts away from the rules over time, and a quick refresher resets it.
Documentation is what turns good practice into proven compliance for Roof Ladders and Crawl Boards in Roofing. Keep your risk assessment, your method statement, your equipment inspection logs and your training records together, and an HSA visit becomes a short, calm conversation rather than a drawn-out investigation.
Frequently asked questions
Do Roofing workers need training to use Roof Ladders and Crawl Boards?
Yes. Safe use of Roof Ladders and Crawl Boards is part of working at height. A Working at Heights Course covers selection, inspection and safe use for Roofing tasks.
How often should Roof Ladders and Crawl Boards be inspected?
Before every use by the operator, plus formal recorded inspections to the relevant standard. Keep the logs for HSA inspection.
Is online training enough for Roofing height work?
Our online Working at Heights Training covers the legal and safe-system knowledge; equipment-specific practical tickets (such as IPAF or PASMA) are added where the task requires them.
Get certified today
Do not wait for an HSA inspection or a near miss to act. Roofing teams can complete the Working at Heights Course online in 45 minutes and download a certificate the same day. For 10 or more learners, see our team training rates, or contact our team for a tailored quote.
Start the online Working at Heights Training now and put a recognised certificate in every worker's file before the next job at height begins.
