In Roofing, Safety Nets and Soft-Landing Systems are a common way to work at height - and a common source of falls when they are misused. This guide explains how Roofing teams in Ireland use Safety Nets and Soft-Landing Systems safely, and why a Working at Heights Course ties it all together.
Safety Nets and Soft-Landing Systems in Roofing: where the risk lies
A re-slating job on a pitched domestic roof in winter, where one slip on a frosted slate can be fatal without edge protection and a rescue plan. Safety Nets and Soft-Landing Systems are suited to collective fall mitigation during roof and steel work where a fall cannot be fully prevented, but in a Roofing setting the margin for error is small.
Pre-use checks for Safety Nets and Soft-Landing Systems
Before any Roofing worker uses Safety Nets and Soft-Landing Systems, confirm that:
- Anchorage is sound
- Nets are rigged by competent riggers
- Nets are undamaged and in date
- The area beneath is clear
The relevant standard here is EN 1263, rigged by trained net riggers as close beneath the work as practicable.
Common Safety Nets and Soft-Landing Systems faults to never ignore
- Damaged or out-of-date nets
- Excessive fall height
- Untrained rigging
- Poor anchorage
Fragile-roof work is one of the HSA's top fatal-fall causes. Crawl boards, perimeter protection and a documented rescue plan are expected before anyone steps onto the roof.
The Working at Heights Course makes compliance simple
Certifying your people is quicker than most employers expect. Our Working at Heights Course is delivered fully online, takes about 45 minutes, and issues a downloadable certificate the same day. It is CPD certified, RoSPA approved and QQI aligned, and it is written specifically for Roofing teams using Safety Nets and Soft-Landing Systems.
The Working at Heights Training covers the avoid-prevent-minimise hierarchy, ladder and stepladder safety, MEWPs and scaffolds, harnesses and anchor points, and how to carry out a proper risk assessment. Every learner finishes with a recognised Working at Heights Certificate that stands up to HSA inspection and supports your insurance position.
Training that goes beyond the tick-box
Weather turns a routine job into a dangerous one faster than anything else in Ireland. Wind, rain, frost and poor light all raise the risk of Safety Nets and Soft-Landing Systems in Roofing, and the right call is often to stop and reassess rather than push on. Knowing where that line sits is part of being properly trained.
Falls from height remain one of the leading causes of serious and fatal workplace injury in Ireland, year after year. The pattern is depressingly consistent for Safety Nets and Soft-Landing Systems in Roofing: a short task, a familiar setting, a ladder or platform that seemed fine, and a single moment of overreach. Proper training breaks that pattern by making the safe choice the automatic one.
Frequently asked questions
Do Roofing workers need training to use Safety Nets and Soft-Landing Systems?
Yes. Safe use of Safety Nets and Soft-Landing Systems is part of working at height. A Working at Heights Course covers selection, inspection and safe use for Roofing tasks.
How often should Safety Nets and Soft-Landing Systems be inspected?
Before every use by the operator, plus formal recorded inspections to the relevant standard. Keep the logs for HSA inspection.
Is online training enough for Roofing height work?
Our online Working at Heights Training covers the legal and safe-system knowledge; equipment-specific practical tickets (such as IPAF or PASMA) are added where the task requires them.
Get certified today
Do not wait for an HSA inspection or a near miss to act. Roofing teams can complete the Working at Heights Course online in 45 minutes and download a certificate the same day. For 10 or more learners, see our team training rates, or contact our team for a tailored quote.
Start the online Working at Heights Training now and put a recognised certificate in every worker's file before the next job at height begins.
