In Scaffolding, Stepladders are a common way to work at height - and a common source of falls when they are misused. This guide explains how Scaffolding teams in Ireland use Stepladders safely, and why a Working at Heights Course ties it all together.
Stepladders in Scaffolding: where the risk lies
A scaffold crew striking a tower at the end of a contract, the highest-risk phase, where guardrails come down before the workers do. Stepladders are suited to low-level indoor tasks where the work is light and the user does not need to overreach, but in a Scaffolding setting the margin for error is small.
Pre-use checks for Stepladders
Before any Scaffolding worker uses Stepladders, confirm that:
- Steps are clean and not damaged
- Feet are intact and stable
- The spreader or restraint is fitted and working
- The platform and any handrail are secure
The relevant standard here is EN 131.
Common Stepladders faults to never ignore
- Standing on the top step
- Worn feet
- Cracked steps
- Missing or broken spreaders
Scaffolds must be inspected by a competent person before first use, after alteration and at least every 7 days, with the inspection recorded and tagged.
The Working at Heights Course makes compliance simple
You do not need a classroom or a lost work day to fix this. Our Working at Heights Course is delivered fully online, takes about 45 minutes, and issues a downloadable certificate the same day. It is CPD certified, RoSPA approved and QQI aligned, and it is written specifically for Scaffolding teams using Stepladders.
The Working at Heights Training covers the avoid-prevent-minimise hierarchy, ladder and stepladder safety, MEWPs and scaffolds, harnesses and anchor points, and how to carry out a proper risk assessment. Every learner finishes with a recognised Working at Heights Certificate that stands up to HSA inspection and supports your insurance position.
Training that goes beyond the tick-box
The most expensive mistake employers make with Stepladders in Scaffolding is treating training as a box-ticking exercise. The Health and Safety Authority does not just want a certificate on file; it wants evidence that the worker understood the avoid-prevent-minimise hierarchy and applied it on the day. A genuine Working at Heights Course builds that understanding, which is exactly why our online programme uses real scenarios rather than slides.
Documentation is what turns good practice into proven compliance for Stepladders in Scaffolding. Keep your risk assessment, your method statement, your equipment inspection logs and your training records together, and an HSA visit becomes a short, calm conversation rather than a drawn-out investigation.
Frequently asked questions
Do Scaffolding workers need training to use Stepladders?
Yes. Safe use of Stepladders is part of working at height. A Working at Heights Course covers selection, inspection and safe use for Scaffolding tasks.
How often should Stepladders be inspected?
Before every use by the operator, plus formal recorded inspections to the relevant standard. Keep the logs for HSA inspection.
Is online training enough for Scaffolding height work?
Our online Working at Heights Training covers the legal and safe-system knowledge; equipment-specific practical tickets (such as IPAF or PASMA) are added where the task requires them.
More on staying safe at height
The rescue plan is the part most teams forget. If a worker doing stepladders in scaffolding falls and is left hanging in a harness, suspension trauma can become life-threatening within minutes. Calling the emergency services is not a rescue plan; having the equipment, the trained people and the method to recover them quickly is. Our Working at Heights Training makes that planning routine.
Get certified today
Do not wait for an HSA inspection or a near miss to act. Scaffolding teams can complete the Working at Heights Course online in 45 minutes and download a certificate the same day. For 10 or more learners, see our team training rates, or contact our team for a tailored quote.
Start the online Working at Heights Training now and put a recognised certificate in every worker's file before the next job at height begins.
