If you are one of the Facilities and Maintenance Teams in Manufacturing, working at height is part of the job - and so is the legal duty that comes with it. Here is what Facilities and Maintenance Teams in Irish Manufacturing need to know, and how a Working at Heights Course keeps you covered.
The responsibilities of Facilities and Maintenance Teams
You face the widest variety of height tasks of any role, so broad training plus task-by-task assessment is essential. In day-to-day Manufacturing work that means you should:
- Assess each varied height task before starting
- Select the right access equipment for the job
- Plan roof and plant access safely
- Never improvise access
The Manufacturing hazards Facilities and Maintenance Teams must control
In Manufacturing, the falls that Facilities and Maintenance Teams most often have to prevent involve roof access for extraction and services, falls onto moving machinery below and work near unguarded pits and openings. Permit-to-work systems should tie work-at-height tasks to lock-out/tag-out so no one is working above live machinery.
The Working at Heights Course makes compliance simple
Here is the good news: getting compliant is fast and inexpensive. Our Working at Heights Course is delivered fully online, takes about 45 minutes, and issues a downloadable certificate the same day. It is CPD certified, RoSPA approved and QQI aligned, and it is written specifically for Facilities and Maintenance Teams in Manufacturing.
The Working at Heights Training covers the avoid-prevent-minimise hierarchy, ladder and stepladder safety, MEWPs and scaffolds, harnesses and anchor points, and how to carry out a proper risk assessment. Every learner finishes with a recognised Working at Heights Certificate that stands up to HSA inspection and supports your insurance position.
Training that goes beyond the tick-box
Weather turns a routine job into a dangerous one faster than anything else in Ireland. Wind, rain, frost and poor light all raise the risk of Facilities and Maintenance Teams in Manufacturing, and the right call is often to stop and reassess rather than push on. Knowing where that line sits is part of being properly trained.
The cheapest control is always to avoid the work at height in the first place. For Facilities and Maintenance Teams in Manufacturing, that can mean long-handled tools, lowering the task to ground level, or designing the job so no one needs to climb. Where that is impossible, collective protection such as guardrails and platforms beats personal protection every time.
Frequently asked questions
Do Facilities and Maintenance Teams in Manufacturing need their own height training?
Yes. Whatever your role, if you plan, supervise or carry out work at height you need a Working at Heights Certificate.
What course suits Facilities and Maintenance Teams best?
The Working at Heights Course covers the duties of Facilities and Maintenance Teams and all other roles in one accredited, online programme.
How long does it take?
About 45 minutes online, with a same-day certificate, so Facilities and Maintenance Teams in Manufacturing stay compliant without losing a work day.
More on staying safe at height
Documentation is what turns good practice into proven compliance for facilities and maintenance teams in manufacturing. Keep your risk assessment, your method statement, your equipment inspection logs and your training records together, and an HSA visit becomes a short, calm conversation rather than a drawn-out investigation.
Get certified today
Do not wait for an HSA inspection or a near miss to act. Facilities and Maintenance Teams in Manufacturing can complete the Working at Heights Course online in 45 minutes and download a certificate the same day. For 10 or more learners, see our team training rates, or contact our team for a tailored quote.
Start the online Working at Heights Training now and put a recognised certificate in every worker's file before the next job at height begins.
