Marine and Ports work in Wexford regularly puts people above ground level, and that means a Working at Heights Course is not optional - it is the law. This guide is for Marine and Ports employers and workers in Wexford who want to stay safe, stay compliant and keep working without an HSA stoppage.
Working at Heights risks in Wexford Marine and Ports
A maintenance team accessing a quayside crane gantry in Cork or Arklow, where a fall could be to the deck or into the water. In a Wexford setting, the most common ways Marine and Ports workers are hurt at height include:
- Access to cranes and gantries
- Falls into water as well as to deck
- Exposed, weather-driven conditions
- Work at height on vessels and quay structures
Equipment Marine and Ports teams in Wexford rely on
Safe Marine and Ports height work in Wexford usually depends on the right access equipment, including MEWPs on quaysides, fall-arrest systems, fixed access ladders and gangways and mobile towers. Each must be inspected before use and matched to the task, never improvised.
Port height work adds drowning risk to fall risk, so rescue planning must cover both.
The Wexford Marine and Ports compliance checklist
- Assess every Marine and Ports task at height and record it
- Provide and inspect suitable access equipment
- Certify every worker with a Working at Heights Course
- Plan rescue before work starts
- Keep training and inspection records for the HSA
The Working at Heights Course makes compliance simple
You do not need a classroom or a lost work day to fix this. Our Working at Heights Course is delivered fully online, takes about 45 minutes, and issues a downloadable certificate the same day. It is CPD certified, RoSPA approved and QQI aligned, and it is written specifically for Marine and Ports teams in Wexford and the wider county.
The Working at Heights Training covers the avoid-prevent-minimise hierarchy, ladder and stepladder safety, MEWPs and scaffolds, harnesses and anchor points, and how to carry out a proper risk assessment. Every learner finishes with a recognised Working at Heights Certificate that stands up to HSA inspection and supports your insurance position.
Training that goes beyond the tick-box
The most expensive mistake employers make with Marine and Ports work in Wexford is treating training as a box-ticking exercise. The Health and Safety Authority does not just want a certificate on file; it wants evidence that the worker understood the avoid-prevent-minimise hierarchy and applied it on the day. A genuine Working at Heights Course builds that understanding, which is exactly why our online programme uses real scenarios rather than slides.
Supervision is the quiet control that holds everything together. Even a perfectly trained worker drifts under time pressure, so someone on site needs the knowledge and the authority to stop unsafe work involving Marine and Ports work in Wexford before it becomes an incident. That only happens when supervisors are trained too.
Frequently asked questions
Do Marine and Ports workers in Wexford legally need height training?
Yes. Any Marine and Ports worker in Wexford who could fall a distance liable to cause injury must be trained. A Working at Heights Certificate is the cleanest proof.
Is the Marine and Ports height course online?
Yes. Our online Working at Heights Training suits Marine and Ports teams in Wexford who cannot lose a day to a classroom, and it issues a same-day certificate.
How often should Wexford Marine and Ports workers refresh?
Every 3 years is recommended, or sooner after an incident or role change. A quick refresher keeps your Wexford Marine and Ports crew current.
Get certified today
Do not wait for an HSA inspection or a near miss to act. Marine and Ports employers and workers in Wexford can complete the Working at Heights Course online in 45 minutes and download a certificate the same day. For 10 or more learners, see our team training rates, or contact our team for a tailored quote.
Start the online Working at Heights Training now and put a recognised certificate in every worker's file before the next job at height begins.
